Cored wire spraying over 20m
This simple video shows the ARC140 twin wire push/pull arcspray system spraying cored wire through a 20m supplies pack. The distance from the wire feed unit to the pistol is 20m. Cored wire is notoriously difficult to spray due to it's low column strength. The Metallisation ARC140 system is seen to spray very successfully, even when feeding the wire over this length with knots tied in the conduits. The system is equally capable when spraying solid wires including zinc, aluminium and steels.
Note: tying tight knots in the conduits is for display purposes only and should not be done in general use as it will cause excessive wear in the conduits.